Description:
The Four Oak Bed Swings R & R (Reclaimed and Recycled) Bed Swing is a rustic porch swing bed made with wood that is reclaimed antique heart pine, while the rest of the structural wood has been either recycled from more modern home deconstructions or milled from trees that have fallen from storms that would otherwise go to the landfill.
Our R & R bed swing can be finished in any way that you desire. However, we believe that the only true way to finish our antique barn wood is to use a hand-rubbed natural oil finish such as pure Tung oil or boiled linseed oil that will give the reclaimed wood deeper contrast and character. And hand rubbing oil enriches the wood, bringing out the beautiful grain and character marks imparted through the years. For even more protection from the elements, we can mix these oils with other exterior grade oil-based finishes.
* Please Note *
For more details on the different Bed Swing cushion packages please go to our Sunbrella Cushions and Accessories storefront.
Installation:
We recommend that your Four Oak Designs bed swing be installed under a covered structure out of direct exposure to the elements. However, because we spray each bed swing with at least 3 to 4 coats of the highest grade exterior clear coating they can be installed under an uncovered structure such as a pergola. For complete instructions on how to install your Four Oak Designs bed swing click here.
Wall Clearance:
When installing your swing bed, it is ideal to allow a clearance of 1.5-feet or more in front and back of bed swing and 1-foot on each side.
Rope Information:
The standard size rope that we use is 1-inch in diameter Manila rope. Whereas most people provide only ¾-inch rope, we think that the 1-inch Manila rope is much more attractive and proportional to the swing, and not to mention a much higher load limit.
Weight: 275lbs
|
Sizes
|
Outside
Dimensions
|
Inside
Dimensions
|
|
Crib
|
66W x 33L x 30H
|
53W x 28L x 30H
|
|
Twin
|
88W x 42L x 30H
|
75W x 39L x 30H
|
|
Full
|
88W x 58L x 30H
|
75W x 54L x 30H
|
*****Outside dimensions can be used to determine the spacing for the 4 mounting points in the ceiling where your swing will be going*****
Your swing will be delivered on a pallet, fully assembled, wrapped for protection, and ready to hang. Four Oak Designs recommends hiring a contractor for a worry-free professional installation of your swing. Crib, twin, and full-size swings do not require additional bracing when hung from any structural support beam measuring 2-by-6 or larger.
**IMPORTANT SHIPPING DETAILS AND INFORMATION**
-All swings are delivered by a certified freight carrier, this means that the carrier must be able to access the delivery address in an 18 wheeler truck. In most cases, freight drivers travel alone and you will need to be ready to assist the driver with your shipment.
Otherwise it will be up to the drivers discretion as to where to leave the swing, this usually means they will set it in your driveway or on your curb.
-Drivers are not responsible for bringing your swing into your home and setting it up. The freight carrier will call in advance to schedule the delivery appointment.
-Shipping is free only to customers in the Continental United States. We do not ship to Alaska, Hawaii, Puerto Rico and American or Foreign territories abroad. We do not ship to Canada.
-Please provide the best phone number for carrier to call and schedule the delivery appointment.
